Skip to main content
Skip to main content

Cradlepoint

This page explains the Captive Portal configuration for Cradlepoint and authentication with IronWiFi.

IronWiFi Console Configuration​

  1. Log into the IronWiFi console or register for free
  2. Create a new network
  3. After that, create a new captive portal, with vendor Cradlepoint

Access Point Configuration​

Please log in to your Cradlepoint Router

At the top, click on Network Settings and choose WiFi / Local Networks

At the bottom of the page, select which Wireless Profile you wish to use and click Edit.

Configure with:

  • WiFi Name (SSID) - Guest WiFi (or whatever you wish)
  • Hidden - Unticked
  • Isolate - Ticked
  • WMM - Ticked
  • Enabled - Ticked
  • Security Mode - Open Click Submit to save

Next, on the same page, above the Wireless Profiles, tick the box beside the Guest LAN network and click Edit.

Configure with:

IPv4 Settings tab:

  • IPv4 Routing Mode - Hotspot IPv6 Settings tab:

  • IPv6 Address Source - None Interfaces tab:

  • WiFi - Guest WiFi: Click the + to move it to the Selected list IPv4 DHCP tab:

  • DHCP Server - Ticked Click Submit to save

Next, click on System Settings at the top and choose Hotspot Services. Configure with:

Under Hotspot Settings:

  • Hotspot Mode - RADIUS/UAM

  • Local IP Network - Guest LAN

  • Allow Service on 3G/4G modems - Ticked

  • Redirect HTTPS Requests - Unticked

  • Hotspot/UAM Auhentication Port - 8000 Under RADIUS Settings:

  • Server Address 1 - get this value from the IronWiFi console

  • Server Address 2 - get this value from the IronWiFi console

  • **Authentication Port - **get this value from the IronWiFi console

  • **Accounting Port - **get this value from the IronWiFi console

  • **Shared Secret -**get this value from the IronWiFi console

  • Confirm Secret - as above

  • Redirect Successful Authentication - Select To an administrator-defined URL and enter: get this value from the IronWiFi console

  • Session Timeout - 240 Mins

  • Idle Timeout - 30 Mins Under UAM Settings:

  • **Login URL -**get this value from the IronWiFi console

  • Splash Page URL - leave empty

  • **Shared Secret -**get this value from the IronWiFi console

  • **Confirm Secret -**get this value from the IronWiFi console Next, under Allowed Hosts/Domains Prior to Authentication click the Add button and add - 107.178.250.42

! You must also install a valid SSL certificate on your controller/AP, in order to avoid authentication issues !

Follow this instructions to enable SSL on your Access Points - https://customer.cradlepoint.com/s/article/Enabling-Secure-Captive-Portal-UAM-Transactions