Why is the Splash Page not loading on my client device?
Several reasons - problem with DHCP, DNS, Walled Garden list on the network controller, or disabled Captive Network Assistant service on the client device.
Try to open the splash page on another computer that is already connected to the Internet. If the page is loading fine, the problem is probably with the Network controller settings or the client device.
Try to connect with a different device. If it connects without issue, the problem is probably with that specific device - try restarting it and reconnect to the network. You can also try to open page http://neverssl.com that should trigger redirect to the Splash page.
Related Articles
Troubleshooting
Why is the Splash Page not loading on my client device? Several reasons - problem with DHCP, DNS, Walled Garden list on the network controller, or disabled Captive Network Assistant service on the client device. Try to open the splash page on another ...
Troubleshooting WPA Enterprise
Client View Wrong XML Check that your client has a certificate to authenticate and that you are using the correct WiFi configuration profile or XML. Trusted Root issues Check that you've done the following: Told your RADIUS Server which certificates ...
Troubleshooting WPA Enterprise
Client View Wrong XML Check that your client has a certificate to authenticate and that you are using the correct WiFi configuration profile or XML. Trusted Root issues Check that you've done the following: Told your RADIUS Server which certificates ...
MikroTik - Passpoint Configuration
Prerequisites Mikrotik device that supports 802.11u. Make sure to use the latest long-term or stable RouterOS releases. Information about the assigned RADIUS servers (Server IP address, port numbers, shared secrets): Email or document that contains ...
MikroTik ROS v7 OpenRoaming with RadSec
Due to the changes in RouterOS firmware, RadSec stopped working in the version 7.15 (and later). If you want to use RadSec, our recommendation is to use ROs 7.14.3 Sign in to the IronWiFi Management Console Go to Networks -> Select the network you ...