D-Link Nuclias Cloud

D-Link Nuclias Cloud

 

IronWifi Console Configuration

  1. Log into the IronWifi console or register for free
  2. Create a new network
  3. After that, create a new captive portal, with vendor D-Link Nuclias Cloud

Access Point Configuration

Log in to your Nuclias Cloud portal.

Step 1 - RADIUS

At the top, click Configure > Access point > RADIUS servers. Then, click Add a RADIUS server and configure with:

  • RADIUS server name - guest_auth
  • Host - get this value from the IronWiFi console
  • Port - get this value from the IronWiFi console
  • Secret - get this value from the IronWiFi console
  • Access level - Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

  • RADIUS server name - guest_acct
  • Host - get this value from the IronWiFi console
  • Port - get this value from the IronWiFi console
  • Secret - get this value from the IronWiFi console
  • Access level - Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

  • RADIUS server name - guest2_auth
  • Host - get this value from the IronWiFi console
  • Port - get this value from the IronWiFi console
  • Secret - get this value from the IronWiFi console
  • Access level - Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

  • RADIUS server name - guest2_acct
  • Host - get this value from the IronWiFi console
  • Port - get this value from the IronWiFi console
  • Secret - get this value from the IronWiFi console
  • Access level - Organization

Click Save to add the RADIUS server.

Step 2 - Walled garden

At the top, click Configure > Access point > Walled garden. Then, click Add a walled garden and configure with:

  • Walled garden name - guest
  • Range - *.ironwifi.com

Press Save to confirm.

Step 3 - SSID

At the top, click Configure > Access point > Profiles and then SSID beside the AP profile you are using. Then, click Add SSID and configure with:

  • SSID name - Guest WiFi (or whatever you wish)
  • Band selection - 2.4GHz and 5GHz

Press Save to confirm. Next, on the SSID you just created and configure with:

  • Security - Open
  • Broadcast SSID - Enable
  • Guest Access mode - Enable
  • NAT mode - Enable
  • Station isolation - Enable

Press Save to confirm. Next, click on the Captive Portal tab and configure with:

  • Captive portal - Sign-on with External Captive Portal
  • Option - Custom External Captive Portal
  • Splash page URL - get this value from the IronWiFi console
  • Primary RADIUS server - get this value from the IronWiFi console
  • Secondary RADIUS server - get this value from the IronWiFi console
  • Primary accounting server - get this value from the IronWiFi console
  • Secondary accounting server - get this value from the IronWiFi console
  • Session timeout - 240 minutes
  • Idle timeout - 60 minutes
  • Walled garden - guest

Click Save to confirm. Finally, click PUSH CONFIGURATION at the top to deploy the configuration to your AP(s).

The configuration is now complete.

    • Related Articles

    • Ruckus Cloud

      IronWiFi Console Configuration Create an IronWiFi account the first>>> Open an account Create a new Network After that, create a new Captive Portal, with vendor Ruckus NBI Access Point Configuration Log in to your ruckus cloud dashboard at ...

    • WatchGuard Wi-Fi Cloud AP

      This page explains the configuration of WatchGuard Wi-Fi Cloud AP wireless access points for external Captive Portal and RADIUS server authentication. IronWiFi Console Configuration Log into the IronWiFi console or register for free Create a new ...

    • TP-Link EAP

      This page explains the configuration of TP-Link wireless access points in standalone mode or managed by the EAP controller. We will configure the device to use an external Captive Portal and RADIUS server authentication. IronWiFi Console ...

    • TP Link Omada (version 4)

      This page explains the configuration of TP Link access points with Omada version 4 controller for external Captive Portal and RADIUS authentication. IronWiFi Console Configuration Log into the IronWiFi console or register for free Create a new ...

    • Where can I check my license IronWiFi, Radius Cloud Services?

      You can check your licensing limits under account settings in the IronWiFi console.